Products

No matter what industry you are in or what type of dust is generated in your factory, we can provide the complete dust explosion protection solution of filters, and explosion isolation flap valves. - Independently tested according to current standards and regulations - Compliant with most international dust explosion protection codes (ATEX and NFPA68) - Widest range of sizes, applications and filter system configurations on the market (incl. approval for positive and negative pressure systems) - Manufactured fully by Nederman under certified quality assurance system, ensuring highest level of quality and reliability

Nordfab's Quick-Fit (QF) Jet Cowl is used as an external outlet, like a chimney, to allow air out and prevent rain from entering ductwork. It can sometimes be referred to as a Weather Cowl. The inner funnel piece allows rain to drain out of the ductwork even when system is not running.

Nordfab's Quick-Fit (QF) Weather Cowl helps prevent precipitation from entering the ductwork. The wide cap minimizes the risk of precipitation entering the dust collection system and the screen reduces the risk of the entry of unwanted wildlife and debris.

Installed in ducting as part of a dust collection system, the Nordfab Inline Spark Trap greatly reduces the possibility of fire in cyclones / collectors by decreasing the number of sparks which could reach the cyclone or collector through the ductwork. The spark trap's effectiveness is based on a simple principle, disrupting the laminar airflow to cause sparks to cool and extinguish before they can enter a cyclone or collector.

Nordfab's Quick-Fit (QF) Back Pressure Flap Valve is a non return air valve, designed to prevent air circulating. Its primary function is to prevent the reverse flow of air within ductwork system. These valves are typically installed in ducts where airflow needs to be unidirectional, such as exhaust vents or ventilation systems.

The Quick-Fit (QF) Silencer without Baffle effectively reduces noise levels generated by airflow while allowing for smooth and efficient passage of air. By absorbing sound energy and minimizing turbulence, these silencers contribute to a quieter and more comfortable environment while maintaining optimal system performance.

Nordfab's Quick-Fit (QF) Wall Plate is used to cover space around QF ductwork when the duct extends through the wall. Available in galvanised steel, raning from 80 mm - 1000 mm in diameter.

Nordfab's Quick-Fit (QF) Roof Plate is used to cover space around Nordfab ductwork when the duct extends through the roof. Available in galvanised steel, raning from 100 mm to 1000 mm in diameter.

Nordfab’s Floor Sweep is easily clamped into QF/FB Ducting systems to provide a quick and easy way to dispose of dust and debris in a shop or manufacturing facility.

Nordfab's Quick-Fit (QF) Drop Out Box is effective at capturing relatively large particles such as wood chips, that may inadvertently enter the ducting system. Inside the duct, deflectors knock chips downward into the built-in hopper. By removing the wood chip, or other particles, drop out boxes help prevent blockages, damage to equipment, or contamination of sensitive processes downstream.