Quick-Fit (QF) Duct Lockformed 1.5m
Nordfab Quick-Fit (QF) ducting with a lockformed seam in 1,5 meters length of duct is available in 0,7 - 0,9 mm thick galvanised or stainless steel, ranging from 80 - 710 mm in diameter.
Quick-Fit Ducting
Nordfab Quick-Fit ducting is used in a wide variety of dust collection, fume extraction, and process ventilation applications. Quick-Fit modular clip-together ducting system with rolled edges saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations – providing one of the lowest life cycle costs of any ducting product. Ductwork is available in galvanised and stainless steel construction.
Quick-Fit Y-Branch 60°
Quick-Fit (QF) clamp-together duct 60° Y-Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Y-Branches are used to port to machine outlets or other duct lines. Y-Branches are often called trouser pieces or breeches.
Quick-Fit Dropout Box
Nordfab's Quick-Fit (QF) Drop Out Box is effective at capturing relatively large particles such as wood chips, that may inadvertently enter the ducting system. Inside the duct, deflectors knock chips downward into the built-in hopper. By removing the wood chip, or other particles, drop out boxes help prevent blockages, damage to equipment, or contamination of sensitive processes downstream.
Quick-Fit (QF) Clip Premium
Nordfab Quick-Fit (QF) Clips allow quick and easy connection during installation as well as subsequent removal and re-use of QF components. The internal gasket quarantees a tight joint. Clips come from factory with Nitrile seals. Available in galvanised steel, ranging from 80 mm to 710 mm in diameter.
Quick-Fit Tee Branch
Quick-Fit (QF) clamp-together duct 90° Tee Branch, Ø80-710 mm, galvanised steel or 304SS construction. Quick-Fit (QF) Tee Branches are used to port to machine outlets or other duct lines. Available in 90° and in galvanised steel or 304SS construction.
Quick-Fit Floor Sweep
Nordfab’s Floor Sweep is easily clamped into QF/FB Ducting systems to provide a quick and easy way to dispose of dust and debris in a shop or manufacturing facility.
Quick-Fit 90 Degree Pressed Bend R=1.5
Quick-Fit (QF) clamp-together duct 90° Bends. Ø80 - 315 mm, galvanised steel construction.
Nordfab's Quick-Fit (QF) bends allow airflow direction change in a run of a duct.
Quick-Fit Cut-in 30°
Quick-Fit (QF) clip-together duct 30° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines.
Quick-Fit Roof Plate
Nordfab's Quick-Fit (QF) Roof Plate is used to cover space around Nordfab ductwork when the duct extends through the roof. Available in galvanised steel, raning from 100 mm to 1000 mm in diameter.
Quick-Fit 60 Degree Pressed Bend R=1.5
Quick-Fit (QF) clamp-together duct 60° Bends. Ø80 - 315 mm, galvanised steel construction.
Nordfab's Quick-Fit (QF) bends allow airflow direction change in a run of a duct.