Quick-Fit Roof Plate
Nordfab's Quick-Fit (QF) Roof Plate is used to cover space around Nordfab ductwork when the duct extends through the roof. Available in galvanised steel, raning from 100 mm to 1000 mm in diameter.
Quick-Fit Ducting
Nordfab Quick-Fit ducting is used in a wide variety of dust collection, fume extraction, and process ventilation applications. Quick-Fit modular clip-together ducting system with rolled edges saves time and money on installation, is easy to clean out, is adaptable to existing ductwork, and is easily re-used during shop floor reconfigurations – providing one of the lowest life cycle costs of any ducting product. Ductwork is available in galvanised and stainless steel construction.
Quick-Fit 60 Degree Pressed Bend R=1.5
Quick-Fit (QF) clamp-together duct 60° Bends. Ø80 - 315 mm, galvanised steel construction.
Nordfab's Quick-Fit (QF) bends allow airflow direction change in a run of a duct.
Quick-Fit Cut-in 90°
Quick-Fit (QF) clip-together duct 90° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines.
Quick-Fit Wall Plate for Pipe
Nordfab's Quick-Fit (QF) Wall Plate is used to cover space around QF ductwork when the duct extends through the wall. Available in galvanised steel, raning from 80 mm - 1000 mm in diameter.
Quick-Fit 45 Degree Pressed Bend R=1.5
Quick-Fit (QF) clamp-together duct 45° Bends. Ø80 - 315 mm, galvanised steel construction.
Nordfab's Quick-Fit (QF) bends allow airflow direction change in a run of a duct.
Quick-Fit Reducer
Quick-Fit (QF) Reducers are used in ducting systems to transition from one larger diameter of duct to a smaller diameter.
Quick-Fit Silencer without Baffle
The Quick-Fit (QF) Silencer without Baffle effectively reduces noise levels generated by airflow while allowing for smooth and efficient passage of air. By absorbing sound energy and minimizing turbulence, these silencers contribute to a quieter and more comfortable environment while maintaining optimal system performance.
Quick-Fit 30 Degree Pressed Bend R=1.5
Quick-Fit (QF) clamp-together duct 30° Bends. Ø80 - 315 mm, galvanised steel construction.
Nordfab's Quick-Fit (QF) bends allow airflow direction change in a run of a duct.
Quick-Fit Flanged Adaptor
The Nordfab Quick-Fit Flanged Adaptor connects clamp-together duct to flanged machine port or flanged ducting.
Quick-Fit Back Pressure Flap Valve
Nordfab's Quick-Fit (QF) Back Pressure Flap Valve is a non return air valve, designed to prevent air circulating. Its primary function is to prevent the reverse flow of air within ductwork system. These valves are typically installed in ducts where airflow needs to be unidirectional, such as exhaust vents or ventilation systems.