Custom Containment Solutions

DuroRoom

The DuroRoom™ portable workstation is custom-engineered to accommodate any workspace and any workpiece. It retracts to 20% of its extended length to accommodate use of an overhead crane and facilitate material handling or save space when not in use.

DuroRoom retractable enclosures are used for painting and coating, clean rooms, isolation rooms, anterooms or gowning rooms and non-destructive testing environments. Most DuroRooms retract but fixed rooms are also available. Sizes up to 15m high x 20m wide x any linear length.

Pair it with:

Key Features

  • Taper Draft Airflow Technology – Moves air through the enclosure in a cross-draft design, minimizing overspray on side walls and improving drying times.

  • Negative, Positive or Neutral Pressure Rooms – Are available depending upon the process.

  • Code-Compliant Enclosure Frame – Galvanized, tube steel frame with welded construction. Comes in 50mm square steel tube, ladder truss, tri-truss or quad truss. Powder coating is available.

  • Heat-welded vinyl and PVC scrim are flame retardant (meeting NFPA 701 requirements), rot, mildew and ultra-violet resistant, for indoor applications.

  • Optional lighting is available; C1D1, C1D2 and standard LED. (Extra lighting is usually not required with our double-polished clear vinyl with 95% light transfer).

  • Quick seals are used to penetrate the vinyl covering and allow mechanicals to enter the enclosure (for air, electrical requirements, etc.).

  • The fire suppression system in DuroRoom is designed by Kidde Badger and protects both exhaust systems and the enclosure. This design moves with the enclosure as it extends and retracts. For non-retracting DuroRooms, wet fire suppression systems can be used.

Technical Specifications

  • Modular design in 1.5m or 1.8m increments, with sizes up to 15m high and 20m wide with unlimited linear length.
  • Door options available: barn doors, bifold doors, solid curtain, mesh curtain, or open face.
  • Custom frame options, such as “V” groove wheels with inverted angle and track for enclosures greater than 12m long.
  • Fabricated from cost competitive, fire-resistant clear and solid vinyl and heavy walled steel framing.
  • All vinyl NFPA 701 compliant, with clear, opaque, and custom options available.

Duroair products are built to imperial measurements. The numbers above have been converted for your convenience. When viewing measurements – please allow for rounding.

Enquiry Info