QF Branches Archives - AtSource Extraction Systems https://atsource.co.nz/qf-branches/ AtSource extraction systems remove harmful emissions at the source. No matter the trade, they provide industry solutions to maintain the health & safety of your workplace, ensuring staff safety with effective ventilation & extraction systems. Tue, 10 Sep 2024 02:08:29 +0000 en-NZ hourly 1 https://wordpress.org/?v=7.0 Quick-Fit Standard Branch 30° https://atsource.co.nz/product/quick-fit-standard-branch-30/ Tue, 10 Sep 2024 01:43:49 +0000 https://atsource.co.nz/?post_type=product&p=6956 Quick-Fit (QF) clamp-together duct 30° Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Standard Branches are used to port to machine outlets or other duct lines. Standard Branches are 30°, optional 45° available upon request. Available in galvanised steel or 304SS construction.

The post Quick-Fit Standard Branch 30° appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Standard Branch 30°

Quick-Fit (QF) clamp-together duct 30° Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Standard Branches are used to port to machine outlets or other duct lines. Standard Branches are 30°, optional 45° available upon request. Available in galvanised steel or 304SS construction.

When ordering, please specify ØA,ØB, ØC.
L = (ØBx2) + 206
ØC must be smaller than or equal to ØA.
ØB must be smaller than or equal to ØC.
Use formulas above to determine if a reducer is needed at ØC.

Enquiry Info

The post Quick-Fit Standard Branch 30° appeared first on AtSource Extraction Systems.

]]> Quick-Fit Double Branch 30° https://atsource.co.nz/product/quick-fit-double-branch-30/ Tue, 10 Sep 2024 01:50:04 +0000 https://atsource.co.nz/?post_type=product&p=6961 Quick-Fit (QF) clamp-together duct 30° Double Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Double Branches are used to port to machine outlets or other duct lines. Standard Double Branches are 30°, optional 45° available upon request. Available in galvanised steel or 304SS construction.

The post Quick-Fit Double Branch 30° appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Double Branch 30°

Quick-Fit (QF) clamp-together duct 30° Double Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Double Branches are used to port to machine outlets or other duct lines. Standard Double Branches are 30°, optional 45° available upon request. Available in galvanised steel or 304SS construction.

When ordering, please specify ØA, ØB, ØC, ØD.
L = (ØBx2) + 206
ØC must be smaller than or equal to ØA.
ØB and ØD must be smaller than or equal to ØC.
ØB must be smaller than or equal to ØD.
Use formulas above to determine if a reducers are needed at ØB or ØD.

Enquiry Info

The post Quick-Fit Double Branch 30° appeared first on AtSource Extraction Systems.

]]> Quick-Fit Y-Branch 60° https://atsource.co.nz/product/quick-fit-y-branch-60/ Tue, 10 Sep 2024 01:54:17 +0000 https://atsource.co.nz/?post_type=product&p=6965 Quick-Fit (QF) clamp-together duct 60° Y-Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Y-Branches are used to port to machine outlets or other duct lines. Y-Branches are often called trouser pieces or breeches.

The post Quick-Fit Y-Branch 60° appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Y-Branch 60°

Quick-Fit (QF) clamp-together duct 60° Y-Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Y-Branches are used to port to machine outlets or other duct lines. Y-Branches are often called trouser pieces or breeches. Standard Y-Branches are 60°, optional 90° available upon request. Available in galvanised steel or 304SS construction.

When ordering, please specify ØA, ØB, ØD.
L = (ØA) + 100
ØB and ØD must be smaller than or equal to ØA.

Enquiry Info

The post Quick-Fit Y-Branch 60° appeared first on AtSource Extraction Systems.

]]> Quick-Fit Tee Branch https://atsource.co.nz/product/quick-fit-tee-branch/ Tue, 10 Sep 2024 01:58:32 +0000 https://atsource.co.nz/?post_type=product&p=6971 Quick-Fit (QF) clamp-together duct 90° Tee Branch, Ø80-710 mm, galvanised steel or 304SS construction. Quick-Fit (QF) Tee Branches are used to port to machine outlets or other duct lines. Available in 90° and in galvanised steel or 304SS construction.

The post Quick-Fit Tee Branch appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Tee Branch

Quick-Fit (QF) clamp-together duct 90° Tee Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Tee Branches are used to port to machine outlets or other duct lines. Available in 90° and in galvanised steel or 304SS construction.

Both ØA ends must be equal.
ØB must be smaller than or equal to ØA.

Enquiry Info

The post Quick-Fit Tee Branch appeared first on AtSource Extraction Systems.

]]> Quick-Fit Cut-in 30° https://atsource.co.nz/product/quick-fit-cut-in-30/ Tue, 10 Sep 2024 02:03:40 +0000 https://atsource.co.nz/?post_type=product&p=6975 Quick-Fit (QF) clip-together duct 30° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines.

The post Quick-Fit Cut-in 30° appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Cut-in 30°

Quick-Fit (QF) clip-together duct 30° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines. Available in 30° and 90°, in galvanised steel or 304SS construction.

When ordering, please specify ØA, Main
L = (ØB / 2) + 58
ØB must be smaller than or equal to the Main.

Enquiry Info

The post Quick-Fit Cut-in 30° appeared first on AtSource Extraction Systems.

]]> Quick-Fit Cut-in 90° https://atsource.co.nz/product/quick-fit-cut-in-90/ Tue, 10 Sep 2024 02:08:29 +0000 https://atsource.co.nz/?post_type=product&p=6979 Quick-Fit (QF) clip-together duct 90° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.
Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines.

The post Quick-Fit Cut-in 90° appeared first on AtSource Extraction Systems.

]]>

Quick-Fit Cut-in 90°

Quick-Fit (QF) clamp-together duct 90° Cut-In Branch, Ø80-710 mm, galvanised steel or 304SS construction.

Quick-Fit (QF) Cut-In Branches are used to branch into main duct lines. Available in 30° and 90°, in galvanised steel or 304SS construction.

When ordering, please specify ØA, Main
L = (ØB / 2) + 58
ØB must be smaller than or equal to the Main.

Enquiry Info

The post Quick-Fit Cut-in 90° appeared first on AtSource Extraction Systems.

]]>