The DuroRoom portable workstation is custom-engineered to accommodate any workspace and any workpiece. It retracts to 20% of its extended length to accommodate use of an overhead crane and facilitate material handling or save space when not in use.

DuroRoom retractable enclosures are used for painting and coating, clean rooms, isolation rooms, anterooms or gowning rooms and non-destructive testing environments. Most DuroRooms retract but fixed rooms are also available. Sizes up to 15m high x 20m wide x any linear length.

Pair it with:

• DuroCap
• DuroPure
• DuroDust
• DuroClean
• DuroTower

Key Features

• Taper Draft Airflow Technology – Moves air through the enclosure in a cross-draft design, minimizing overspray on side walls and improving drying times.

• Negative, Positive or Neutral Pressure Rooms – Are available depending upon the process.

• Code-Compliant Enclosure Frame – Galvanized, tube steel frame with welded construction. Comes in 50mm square steel tube, ladder truss, tri-truss or quad truss. Powder coating is available.

• Heat-welded vinyl and PVC scrim are flame retardant (meeting NFPA 701 requirements), rot, mildew and ultra-violet resistant, for indoor applications.

• Optional lighting is available; C1D1, C1D2 and standard LED. (Extra lighting is usually not required with our double-polished clear vinyl with 95% light transfer).

• Quick seals are used to penetrate the vinyl covering and allow mechanicals to enter the enclosure (for air, electrical requirements, etc.).

• The fire suppression system in DuroRoom is designed by Kidde Badger and protects both exhaust systems and the enclosure. This design moves with the enclosure as it extends and retracts. For non-retracting DuroRooms, wet fire suppression systems can be used.

DuroDust is the mobile dust collection system with non-vented, non-ducted, industrial dust collection technology. From silica dust to hexavalent chromium, it’s the safe, clean air solution for stone cutting, welding, sanding, grinding, painting, and coating preparation. The DuroDust is used for non-combustible dust only.

• St 0: Kst value 0 – no explosion. Typical of silica dust, welding-generated dust and thermally generated dusts from cutting processes.

For a complete clean air solution, pair DuroDust with:

• DuroRoom

Key Features

• Negative pressure pulls all particulate to the filtration system.
• Engineered airflow requirements from 13,500 CFM to 120,000 CFM and beyond, to achieve airflow from 50 FPM to over 150 FPM through the enclosure and ensure dust/smoke will not escape.

• Designed with 4 stages of highly-efficient filtration captures all particulate to 1 micron and 99.7% of particulate to 0.3 micron.

• Captures 99+% of Hexavalent Chromium particles generated during surface preparation processes.

  • First stage: Mesh pre-filter
  • Second stage 3 ply particulate
  • Third stage is 3 ply finer particulate
  • Fourth stage is a NESHAP 319, MERV 15, MERV 16 or HEPA filter, depending upon requirements

• Nut and bolt panel assembly, easy panel on off speed dial, option for a lockable fused disconnect and C/UL/US Listed with a pre-wired control panel.

• Directs air down the center of the enclosure to send particulates to filter banks creating a regulated area.
• Energy-efficient VFD with adjustable air speeds, doubles as a soft starter to eliminate the need for a motor starter.

• The DuroDust is a non-vented system. Filtered air is returned to workspace.

The DuroClean exhaust system filters air to an ISO 6 standard to create portable clean rooms or isolation rooms for mechanical assembly, additive manufacturing, R&D, and other processes requiring a clean environment. Combined with our DuroRoom soft wall retractable enclosure, soft wall fixed or hard wall enclosure the DuroClean engineered exhaust system becomes a flexible, cost-effective solution for on-demand clean rooms and isolation rooms wherever and whenever they are needed.

Pair it with:

• DuroRoom

Key Features

• Isolates hazardous processes or protects a process within a larger manufacturing facility for a safe, controlled environment.
• Neutral pressure capability for simple containment.

• HEPA Filter Configurations – Options include single pass and recirculating designs, with options for cooling and heating and dehumidification.

• Custom Filtration Options – Include prefilter, gas phase media, and HEPA and ULPA filters available in 99.97 and 99.99% efficiencies with options for UV light.

• Airflow Options – Laminar or unidirectional airflow systems, as well as turbulent or non-unidirectional airflow systems.

• Combines air changes per hour (ACH) with filtered air circulating into the cleanroom many times per hour (designed to meet ISO classifications).

DuroTable is the industrial downdraft table that requires no ducting, air makeup, or EPA permits. Customizable sizes and multi-stage filtration make it the ideal dust collection table for grinding, sanding, and welding. Pair it with DuroRoom for optimal worker protection and OSHA compliance.

Pair it with:

• DuroRoom

Key Features

• Options include 1.2m x 2.1m , 1.5m x 2.4m tabletop, 0.9m- 1m High, with custom configurations available.

• Dust collection filtration can be customized by particle size including NESHAP 319 filter and HEPA filters.

• Energy-efficient VFD with adjustable air speeds, doubles as a soft starter to eliminate the need for a motor.

Quick-Fit (QF) Reducers are used in ducting systems to transition from one larger diameter of duct to a smaller diameter.

When ordering, please specify ØA, ØB.

Quick-Fit (QF) Flanged Adaptor allows quick connection of QF duct to a flanged connector.

The Quick-Fit (QF) End Caps connect easily to other ductwork with the QF Clamp and are used to cap-off an unused ducting port. End Caps are ideal for blocking a port needed for future expansion or when a machine has been moved. It is available in galvanised steel construction and ranges from 80 mm to 710 mm in diameter.

Nordfab’s Quick-Fit (QF) Back Pressure Flap Valve is a non return air valve, designed to prevent air circulating. Its primary function is to prevent the reverse flow of air within ductwork system. These valves are typically installed in ducts where airflow needs to be unidirectional, such as exhaust vents or ventilation systems. By allowing air to flow in one direction only, non-return air valves help maintain the intended airflow pattern and prevent the backflow of air from entering unwanted areas or contaminating clean air spaces. Available in galvanised steel, ranging from 160 mm to 710 mm in diameter.

The world’s fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime.

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.

Nordfab Quick-Fit (QF) Clips allow quick and easy connection during installation as well as subsequent removal and re-use of QF components. The internal gasket quarantees a tight joint. Clips come from factory with Nitrile seals. Available in galvanised steel, ranging from 80 mm to 710 mm in diameter.

The world’s fastest ducting
For most dust and fume collection requirements and applications, Nordfab Quick-Fit (QF) modular clip-together ducting is a crucial component of dust collection, fume extraction, and process ventilation systems. It has the capability to significantly reduce installation time by up to 50%, resulting in cost savings and reduced downtime.

Easy to install
Quick-Fit is easy and quick to install, designed for effortless cleaning, and can be reused when adjusting facility layouts, providing one of the lowest life-cycle costs of any ducting product. The Quick-Fit rolled edges allow quick and easy connections with the Quick-Fit Clip when installing, extending, or taking apart runs of duct.