A compact stationary high vacuum unit with high filter efficiency and enhanced flexibility

The Nederman L-PAK offers the ideal solution for removing dust and fumes in all types of industries. Typical areas of applications can be found in welding shops, car body shops, construction industries, bakeries, industrial laundries, etc. The L-PAK is also perfect for cleaning of the workplace and the workshop floor. The L-PAK is easy to position and move due to its compact design, its low weight and the frame for fork lift handling. The integrated PLC-control ensure high functionality and can easily be updated with new functions. The automatic start/stop will save energy as well as extend the lifetime of the unit. The remote start/stop function makes it easy to ensure that everything is shut off when you go home from work.

Safe use
The duty idling and the temperature control functions reduce the risk of the fan getting overheated. There is also an indicator to show when service is required.

Unique and economic filter concept
The filter concept in L-PAK is unique as it combines high filter efficiency with long lifetime. A dynamic reducer separates coarse particles. Fine particles are separated on surface treateda long lifetime. The polypropylene fine filter can easily be replaced by an antistatic filter if needed. You may also add a micro filter to filtrate even the finest particles.

Automatic filter cleaning as standard.
Continuous high performance is obtained by automatic filter cleaning (as standard). L-PAK uses filter cleaning by a short blast of reversed atmospheric air. By the rapid opening of a valve located on top of the filters, a powerful air pulse is created, efficiently dislodging dust from the filter socks.

Compact high vacuum unit, the ideal solution for removing dust and fumes
The compact E-PAK for multi-purpose use is the ideal solution for the extraction of sanding and grinding dust and for welding fumes. Also suitable for cleaning of the workplace and the shop floor. The E-PAK is a powerful vacuum unit and can serve up to six extraction points, all in use at the same time. Typical areas of application can be found in welding shops, car body shops, construction industries, bakeries, industrial laundries etc.

Power control can be obtained by fitting automatic vacuum valves to the extraction points. The valves provide suction power when an operation starts. When the work stops and all the valves have closed again, the E-PAK unit will stop.
Automatic vacuum valves offer substantial energy savings and make a small unit manage the job otherwise requiring a large unit. Using automatic valves multiplies the number of working points that can be served, by three to four times.

Low noise level is an obvious demand in today’s working environment. E-PAK is developed to fit into normally noise sensitive premises thanks to efficient silencers and acoustic enclosure. The enclosure is easily removed for service.

Easy to install
Low noise level
Low running and maintenance costs

Watch video

Modular designed dust collector
Dust collector with 2-stage filtration. Central inlet with velocity reducer. Fully automatic filter cleaning. Can easily be equipped with a great variety of filter materials, bins, emptying systems, etc. Standard equipped with circular bags of polypropylene. PTFE or antistatic PTFE filters on request.

Watch video

The leading extraction solution. Always the right capacity.
The FlexPAK high vacuum unit represents the foremost solution on the market. The unit is designed for the extraction of welding fumes, grinding dust, metal chips etc. FlexPAK is suitable for cleaning the workplace, the shop floor, and machines. FlexPAK regulates the speed of the motor automatically depending on the vacuum demand. Compared to traditional controllers, FlexPAK provides an optimal, and well-balanced vacuum according to the need, ensuring energy-saving operation. The filters are effectively cleaned by applying powerful air bursts to the filter through quick opening valves. The dust is knocked off by the impact and collected in the dust bin. The sequence is controlled by the PLC, and it can be adjusted to suit every installation. This maximizes the life of the filter and ensures the correct functioning of the unit. FlexPAK can be fitted with different types of alarms, for example, level monitors for waste containers, filter indicators (for clogged filters) and fire alarms. Alarms can be activated at A and B levels and can be set to give both visual and audible signals. FlexPAK800 is a high vacuum unit, suitable for applications where metal chips, shot blasting grit and other heavy material need to be removed. FlexPAK1000 operates at a lower vacuum level and is suitable for extracting welding fumes and grinding dust and for use where a constant airflow, independent of the number of users, is a requirement.

Easy to install
Built in PLC functions
Low running and maintenance costs
Built in safety functions
Suitable for a wide range of applications

Watch video

Mobile units for continuous welding application and for one or two users. Fumes extracted directly at the torch.

The Fume Eliminator 24/7 1.5 & 2.5 are mobile high vacuum units designed to extract welding fumes in a continuous basis. Connected to a welding torch with integrated extraction, the Fume Eliminator 24/7 1.5 & 2.5 units extracts the fumes directly at source for one or two welders. Automatic filter cleaning, side channel fans with high capacity and all special values that a Nederman product offers.

Upgrade with automatic start/stop function is available for user-friendly operation and improved energy efficiency.

• Fumes are extracted efficiently during long shifts of welding thanks to the continuous run, efficient and maintenance-free side channel blower
• Easy adjustment of air flow depending on application improves productivity and energy efficiency.
• Efficient and automatic filter cleaning assures long filter life for low operating cost.
• Integrated spark trap protects the FE 24/7 from sparks and minimizes the risk of damages to the filter cartridge.
• Filtered air can be re-circulated even when particulates are from high alloy steel. The unit is W3 approved (EN 15012).

Portable source capture directly on welding torch

The Fume Eliminator is designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle, the Fume Eliminator unit extracts the fume directly at source. FE 840 has a manual start/stop function while the FE 841 has an automatic start/stop function, which starts the unit as soon as the welding begins.

Suitable for extraction of fume from maintenance welding applications.