Extraction arm that fulfills all requirements for use in environments containing explosive dust and gas, and with extremely high hygienic demands.
The NEX S arm fulfills all requirements for use in environments containing explosive dust and gas, and with extremely high hygienic demands. It has a double earthed system and antistatic earthed ventilation hose that prevents static electricity and sparks. Open support arm system and hood of acid proofed polished stainless steel requires a minimum of maintenance and makes it easy to clean.The NEX S is not marked with the EX symbol since it does not fall under the scope of the directive 2014/34/EU. Even if it does not have the EX marking, it is highly suitable for use in zones 1/21, 2/22 according to ATEX-work directive 1999/92/EC. The arm is double earthed, by the helix in the hose and through the arm system. The hose is made of antistatic Polyurethane.

Minimum maintenance
Easy to clean
Double earthed
Flexible arm, easy to position

The arm is flexible in all directions and simple to position and to extend
The Nederman Telescopic arm is specially designed for working environments with fumes, vapours or non explosive dust, where the space is limited. Typical workplaces can be welding schools or for production in small welding booths, or other industrial processes where a small, easily positioned arm is required. The reach of the arm is between 0.9 and 1.6m (3 and 5 ft).

The arm has a balanced telescopic action by an adjustable balance block
The product is suspended by a swivel, which allows the product to rotate 360 degrees.

Watch video

The Original welding fume extraction arm is the perfect solution for extracting welding smoke, fumes and dust in workshops. Our extractor’s patented design ensures optimum fume and dust capturing capacity and manoeuvrability. The extraction hood has integrated easy-to-reach buttons for lighting and fan control. The extractor is suspended by a swivel, which allows the product to rotate 360 degrees. This makes the extraction arm flexible in all directions and very simple to position. The Original extraction arm can be mounted in combination with different brackets, extension arms, on exhaust rails or on fixed or portable filter equipment. The product is equipped with a damper in the hood as standard. The welding fume extraction arm is available in lengths from 2-4 m and can be mounted on a ceiling, wall or bench or to an extension bracket. A wide range of accessories give unlimited possibilities to match the needs at any workplace. A swivel allows the product to rotate 360 degrees. Flexible extractor in all directions and simple to position. Damper in the hood as standard. Thousands of installations worldwide

Watch video

Dia. 50,75 and 100. Length:700 to 2400 Version: original, Chem and ESD/EX.

The best and most cost-efficient solution for extraction of hazardous airborne contaminants, in applications where small, flexible and easy-to-use arms are required.

Nederman FX2 arms are made of lightweight anodized aluminium sections, with three adjustable, composite friction joints. Offering strength and durability combined with easy handling, they can be used in many types of environment. They are especially suitable for applications where small, flexible and easy-to-use arms are required.
A robust and reliable all-round arm for general applications where there is little risk of electrical discharges or attack by aggressive chemicals.

Optimal efficiency and low noise provides safe and quiet working environment
Ceilings, walls and floors or fixed to worktops mountings and cut2fit extension profile gives maximum installation flexibility
The two outermost arm joints can rotate and swivel through 360°, which gives the unique manoeuvrability

The lean, smooth and aesthetic design allows arms to fit in well in any environment without compromising its durability and reliability

Highly integrated products that save customers’ time and costs, as well as providing the reliability and functionality to deliver a better performance

Combusitble dust extraction arm with a double earthed system, antistatic earthed ventilation hose that prevents static electricity and sparks.
The Nederman NEX DX combustible dust extraction arm has a double-earthed system, antistatic-earthed ventilation hose that prevents static electricity and sparks. The dust extractor is suitable for industries where hygiene is a top priority. NEX DX has concealed joints and a separate easy to mount hose. Enclosed support arm, separate hose and a stainless steel hood means the DX extraction arms require little maintenance and is easy to clean. The NEX DX arm is not marked with the EX symbol since it does not fall under the scope of the directive 2014/34/EU. Even if it does not have the EX marking, it is highly suitable for use in zones 21, 22 according to ATEX-work directive 1999/92/EC. The arm is double-earthed, by the helix in the hose and through the arm system. The hose is made of antistatic Polyurethane.

Minimum maintenance
Easy to clean
Double earthed
Flexible arm, easy to position
Recommended for use in explosive environments, zone 21,22

Watch video

Ideal fume and dust extractor for heavy duty welding and where high airflows are demanded

NEX HD welding fume and dust extraction arms are the top of the range arms when it comes to high airflows and extraction of fume and dust with higher temperatures than normal. The extraction arms are specially designed for working environments with very heavy smoke, vapours and non explosive dust.

Typical workplaces are the metal fabrication industry or other type of industries where the need for extraction with large airflows is needed. The applications can be welding, laser or hand plasma cutting, metal spraying, grinding where lots of spatter is generated, or other industrial processes where a perfect balanced and easily positioned arm is required.

The NEX HD welding fume and dust extraction arm is also available with a patented hood design. The hood, made of aluminium, is resistant to high temperatures of extracted air (+120°C) and has a very high capturing capacity. The NEX HD model is ideal for heavy duty welding and where high airflows are demanded. The arm is available in four lengths; 2-5 m (6.6-16 ft).

Arm is suspended by a robust swivel, which allows the product to rotate 360 degrees.

Flexible in all directions, perfectly balanced and very simple to position
Support mechanism of the arms are encapsulated which protects against dirt
Can be mounted in combination with different brackets, extension arms or on exhaust rails

Watch video

With high air flow and low pressure drop NEX MD extraction arm is perfect in medium to heavy duty welding fume and welding dust applications
NEX MD welding fume extraction arms are the top of the range arms when it comes to high airflows and extraction of media with higher temperatures than normal. The weld fume extractors are specially designed for working environments with very heavy smoke, vapours or non explosive dust. Typical workplaces are the metal fabrication industry or other type of industries where the need for extraction with large airflows is needed.

The applications can be welding, laser or hand plasma cutting, metal spraying, grinding where lots of spatter is generated, or other industrial processes where a perfect balanced and easily positioned extraction arm is required. Nederman NEX MD is an welding fume and welding dust extraction arm that also has a newly designed hood.

The hose, 160 mm in diameter (6,3″), in combination with the external arm system, provides a high air flow and a low pressure drop. Nederman NEX MD is thus perfect in medium to heavy duty applications. The arm is available in four lengths, 2-5 m (6.6-16 ft).

Arm is suspended by a robust swivel, which allows the product to rotate 360 degrees.

Flexible in all directions, perfectly balanced and very simple to position
Support mechanism of the arms are encapsulated which protects against dirt
Can be mounted in combination with different brackets, extension arms or on exhaust rails

Watch video